Quick answer: the ERGONOZ ZEN-0 is a new gas-spring monitor arm with a modern, sporty look — a muscular profile and visible joints, built to be part of the setup rather than just the thing holding the screen. It supports 17–32" monitors up to 9 kg each, tilts up to +90°, lets you pop the monitor on and off in seconds with a fast-insert VESA plate, and has a built-in cable channel. Matte black or matte white. Single ฿1,290, Twin ฿2,200, 3-year warranty.
What ZEN-0 is, and how it differs from a typical arm
Most entry-level monitor arms are designed to be unremarkable — not bold, not sleek, just capable of holding a screen. ZEN-0 (“zen zero”) goes the other way: if the arm is going to sit on your desk every day, it should look good enough to be noticed. The profile is dense and defined, the joints show their mechanism, and the model badge sits on the arm itself — at home on gaming desks, creator setups, and any desk where every piece of gear was chosen to match.
- Design: Modern & Sporty — a muscular profile with exposed joints, in Matte Black or Matte White
- Mechanism: gas spring with adjustable tension — lift, lower and turn the screen with one hand
- +90° tilt: the widest upward tilt of our new arms, for screens that sit below eye level or are viewed from a high or reclined seat
- Daily use: fast-insert VESA plate, so you can lift the monitor off to clean the desk and click it back without a screwdriver
ZEN-0 Single and Twin specifications
| ZEN-0 Single | ZEN-0 Twin | |
|---|---|---|
| Price | ฿1,290 | ฿2,200 |
| Model | EGN-ZEN-0-S | EGN-ZEN-0-D |
| Screens | 1 | 2 |
| Screen size | 17–32" | 17–32" each |
| Max weight | 9 kg | 9 kg per screen |
| VESA | 75x75 / 100x100 | 75x75 / 100x100 |
| Tilt | +90° to −45° | +90° to −45° |
| Rotation / swivel | ±180° / ±90° | ±180° / ±90° |
| Max arm reach | 53 cm | 53 cm per arm |
| Curved monitors | Yes | Yes |
| Fast-insert VESA plate | Yes | Yes |
| Adjustable gas-spring tension | Yes | Yes |
| Cable management | Yes | Yes |
| Clamp | One-piece C-clamp with rubber desk pad | One-piece C-clamp with rubber desk pad |
| Mounting | Clamp 10–70 mm / grommet 10–60 mm | Clamp 10–70 mm / grommet 10–70 mm |
| Arm dimensions | 546 x 115 x 502 mm | 1054 x 115 x 502 mm |
| Colours | Matte Black / Matte White | Matte Black / Matte White |
| Warranty | 3 years | 3 years |
Four things you notice in daily use
1. The monitor comes off without a screwdriver
The fast-insert plate is fixed to the back of the monitor once; after that the screen slides onto and off the arm in a moment. Useful if you occasionally carry the monitor elsewhere, or simply like wiping the desk with nothing in the way.
2. Spring tension that matches your screen
A 3 kg 24" panel and an 8 kg 32" panel need different lifting force. ZEN-0's gas spring is adjustable, so the screen stays exactly where you let go — no slow sag, no bounce.
3. Tilts up to 90°
A +90° upward tilt is more useful than it sounds: a screen on a low desk, a monitor watched from a reclined gaming chair, or a secondary display laid back like a tablet all need more upward angle than usual. Downward tilt is −45°, enough for any sitting or standing position; if you need to angle a screen almost face-down (a drawing display, say), the CORE with its ±90° tilt is the better match.
4. A one-piece clamp with a rubber pad
ZEN-0's C-clamp is a single piece, quick to fit, with a rubber pad where it meets the desk to protect wooden or glossy tops. Power and signal cables tuck into the arm's channel; if your existing cables are too short, our desk cable management guide covers how to size replacements.
ZEN-0 or CORE at the same price?
Both are gas-spring arms for 17–32" screens up to 9 kg, VESA 75/100, clamp or grommet, and the Single versions both cost ฿1,290. The difference is what you value:
- Choose ZEN-0 if you like a sporty arm that is part of the setup, want white, take the monitor off often (fast insert), or want the 3-year warranty.
- Choose CORE if you need the deep −90° downward tilt, or prefer a classic, understated arm.
There is a second new arm launched alongside it: the ZIMPLEX, which goes simple and minimal and is rated for 10 kg. We compare the two in ZIMPLEX vs ZEN-0. Not sure your monitor can take an arm at all? Check the VESA pattern first — it takes under a minute.
Frequently asked questions
Does ZEN-0 work with curved monitors?
Yes, as long as the monitor has 75x75 or 100x100 VESA holes, is 32" or smaller, and weighs 9 kg or less. Most 27–32" curved panels fit.
How thick can the desk be?
The clamp fits desk edges 10–70 mm thick; the grommet mount fits 10–60 mm (Single) or 10–70 mm (Twin). For thin particleboard or hollow edges, add the reinforcement plate.
Can the Twin hold two different-sized monitors?
Yes. Each arm adjusts independently, so as long as each screen is within 17–32" and 9 kg you can level them without spacers.
Does white cost more than black?
No — Single ฿1,290 and Twin ฿2,200 in either finish.
Is it hard to install?
No. Both clamp and grommet hardware and the tools are in the box; allow about 15 minutes. Our step-by-step guide: How to install a monitor arm yourself.
The bottom line
ZEN-0 is for people who want a monitor arm that looks as good as it works — a modern sporty profile, wide upward tilt, fast monitor removal and a 3-year warranty, at the same price as our best-seller. See the ZEN-0 Single and ZEN-0 Twin, or compare the whole range in the Monitor Arms collection — orders over ฿800 ship free in Thailand.
Reader code: enter ERGONOZWELCOME15 at checkout on shop.ergonoz.com for 15% off your order (one use per customer).
About ERGONOZ — a Thai ergonomics brand designing monitor arms, standing desks, and ergonomic chairs for the way you actually work. Read the brand story at ergonoz.com.